Alpha Textile FAQ

Alpha Textile is an SGS verified, Oekotex-100 & WCA audit, ISO 9001 approved manufacturer.

Normally we need 60~70days from customer confirmed the official order to us or we get the 30% deposit payment. But this is depend on the fabrics’ quality, special fabrics will need about 80days for lead time. For repeat order, we only need 50~60day.

• We have VP Sales located on United States supplying market intelligence. Worked with our experienced design team to quickly response customer’s requirements, and be able to establish our own product lines.
• We have a strong and experienced sales team that responsible for specific customers and products.

QA follow up on-site checking of weaving, dying&printing, cut & sew, packaging and final inspection during the whole production processes.

QA give instruction and training to factories frequently after analysis of inspection reports to consistently improve factory quality system. 

QA hold self audit quarterly to provide support and guide Social Compliance and Factory Evaluation.

• Our advantage in supply chain is our tight network of factories.
• We have 100% owned cut & sew factory, also have partner mills including Spinning & Weaving, Printing & Dyeing。
• We purchase greige and arrange printing and dyeing independently, to ensure consistent quality, efficient cost and lead time.
• We are fully integrated from R&D until delivery.

We arrange the test with BV lab to ensure the quality of fabrics to meet customer’s requirment. And we also could arrange 3rd inspection for the ready goods according to customer’s comments.

• Inspect the label: Look at the care label to inspect any special instructions. While some comforters must be dry cleaned, some may be cleaned at home. Take your comforter to a professional cleaner if it can only be dry-cleaned.
• Pre-treat any stains: Before washing your comforter, pre-treat any stains. You can apply laundry detergent or stain remover straight on the spot and let it sit briefly before washing.
• Utilise a big washing machine: It’s crucial to use a big washing machine so your blanket can fit in without being squashed. Use a commercial washer or transport your comforter to a laundromat if it is too large for your washing machine.
• Employ a light detergent: Be sure the detergent you use is gentle enough to be used on bedding. Avoid using fabric softeners or bleach since they might harm the fabric and impair the comforter’s fluffiness.
• Cold water for washing: Wash your comforter in cold water, and the cloth may shrink or suffer other damage when washed in hot water.
• Employ the gentle cycle: To wash your comforter, use the washing machine’s gentle cycle. This will lessen the likelihood of the fabric being stretched out or harmed.
• Rinse well: To get rid of any detergent residue left over from washing, rinse your comforter well.
• Dry on low heat: Using your dryer’s low heat setting when drying your comforter is recommended. Hot temperatures can wreak havoc on the fabric and make the filler stick together. A few clean tennis balls or dryer balls can be added to the dryer to help fluff up the duvet and keep it from being lumpy.

Cleaning a comforter requires some attention to detail, but it can be done at home with the correct equipment and methods. Following these instructions, you can guarantee that your comforter will be fluffy, clean, and fresh.

A comforter, akin to a plush, thick blanket, is a favored bedding choice. Crafted as a unified piece, it comprises a fabric shell enfolding a cozy fill. Positioned atop a flat sheet or another blanket, comforters are integral parts of bedding ensembles. They exhibit diverse styles and are commonly bundled within bedding sets.

The key distinction lies in their composition. A comforter is a single-piece bedding item, evenly quilted for consistent filling. On the other hand, a duvet consists of two separate components: an insert and a cover. The insert functions as the fill, enclosed within the cover.

Look for specific indicators such as a thread count of at least 300, a durable outer shell material, premium inner fill material, and meticulous stitching, preferably in a baffle box design. When inspecting bedding in person, assess the material’s feel and loft, ensuring the stitching is even and there are no loose threads for a superior product.

If it’s not exposed to spills or excessive dirt and doesn’t have a protective duvet, aim for cleaning it every one to two months. However, if it’s encased in a duvet, a few times a year should suffice.

Over time, the filling in your comforter may lose its elasticity, impacting its ability to trap air and regulate your body temperature. Recognizing these signs is crucial to know when it’s time to replace your comforter.

A duvet cover is a protective fabric case that fits over a duvet, which is a type of bedding consisting of a soft flat bag filled with down, feathers, wool, or a synthetic alternative. Duvet covers are designed to keep the duvet clean and well-protected, functioning similarly to a pillowcase on a pillow. They come with closures like buttons, zippers, or ties, allowing for easy insertion and removal of the duvet.

A duvet cover serves several purposes:

1.Protection

It protects the duvet or comforter from dirt, stains, and wear, prolonging its lifespan and keeping it clean.

2.Hygiene

Duvet covers are easily removable and machine washable, ensuring a clean and fresh sleeping environment. Regular washing helps eliminate dust mites and allergens.

3.Style

Duvet covers come in a variety of colors, patterns, and textures, allowing you to change the look of your bedroom without replacing the entire duvet. They serve as a decorative element, enhancing the overall aesthetics of the bedroom.

4.Versatility

Duvet covers can be used without a top sheet, providing a lightweight yet warm covering for sleep. In warmer months, a duvet cover can be used on its own as a lightweight blanket.

5.Ease of Use

Duvet covers often have closure mechanisms like buttons, zippers, or ties, making it easy to insert or remove the duvet. This simplifies the process of making the bed compared to traditional comforters, which can be bulky and difficult to maneuver.

In summary, a duvet cover combines practicality, style, and convenience, making it a popular choice for bedding.

DUVET COVERS are crafted from a variety of high-quality materials to ensure comfort and durability. Common materials used in making DUVET COVERS include:

1.Cotton

Cotton DUVET COVERS are soft, breathable, and ideal for year-round use. They come in various thread counts, offering different levels of softness and luxury.

2. Microfiber

Microfiber DUVET COVERS are made from finely woven synthetic fibers. They are exceptionally soft, hypoallergenic, and resistant to wrinkles and stains.

3. Linen

Linen DUVET COVERS are made from the flax plant, offering a natural and textured look. Linen is highly breathable, absorbent, and becomes softer with each wash.

4. Silk

Silk DUVET COVERS provide a luxurious and smooth feel. They are naturally hypoallergenic and temperature-regulating, making them perfect for a comfortable night’s sleep.

5. Sateen

Sateen DUVET COVERS are made from cotton fibers woven in a way that creates a silky and lustrous surface. They are exceptionally smooth and have a subtle sheen.

6. Jersey

Jersey DUVET COVERS are made from a stretchy, knitted fabric similar to that of T-shirts. They are soft, lightweight, and perfect for a cozy and relaxed bedroom atmosphere.

7.Polyester

Its advantages include wrinkle resistance, abrasion resistance, excellent color retention, easy cleaning, affordability, and versatility in design. DUVET COVERS made from polyester stand out for their durability, easy maintenance, and diverse style options, making them a popular and practical choice for consumers.

When choosing a DUVET COVER, consider the material that best suits your preferences for comfort, maintenance, and style. Each material offers unique benefits, ensuring you find the perfect DUVET COVER for your bed.

A quilt comprises three layers: a decorative top, a warm filling called batting or wadding, and a practical backing. These layers are stitched together using quilting stitches or, in some cases, evenly spaced yarn or string ties.

Quilts generally offer a cooler sleeping experience compared to comforters. Comforters often feature thicker layers of insulative materials, making them warmer. Quilts are ideal for individuals who sleep hot, providing a comfortable night’s rest. However, in colder climates, quilts might not provide sufficient warmth.

Originally, quilts served practical purposes as clothing or bed coverings to provide warmth. However, they have evolved beyond mere utilitarian items, transforming into intricate, decorative artworks. Crafting quilts became a creative outlet, representing a profound connection to generations of tradition and showcasing the artistic talents of individuals.

This question often arises, and it’s important to note that quilts are excellent choices for individuals who tend to sleep hot or desire a specific aesthetic for their bedroom. On the contrary, comforters prove beneficial during winter or cooler months, providing warmth and coziness for those who prefer a cooler sleep environment.

When it comes to softness, opt for blankets crafted from cotton, cashmere, or plush, renowned for their unparalleled comfort. However, if you constantly battle the cold, consider wool, fleece, or faux fur options, known for their exceptional warmth and coziness, making them the perfect choice for the chilliest nights.

Wool is universally acknowledged as the warmest material for winter blankets. Its fibers contain tiny air pockets that facilitate heat circulation, keeping the sleeper comfortably warm. Additionally, wool’s porous fibers efficiently absorb moisture without feeling damp, ensuring optimal warmth by wicking away perspiration.

For ultimate warmth and comfort, opt for a wool or cashmere blanket. Wool is not only breathable but also possesses moisture-wicking properties, ensuring you stay warm and dry. If you have wool allergies, consider a fleece alternative crafted from synthetic materials. Fleece blankets are not only cozy but also easy to clean in the convenience of your home.

Opt for a light-colored, sheer fabric that allows natural light to filter through. Choose a material like cotton that can withstand the moisture in a humid bathroom environment.

Opt for lightweight fabrics like cotton or polyester, as they dry quickly and are less prone to mildew compared to heavy materials like brocade or velvet. When shopping for bathroom curtains, keep this in mind. Avoid wooden blinds in the bathroom, as they are susceptible to mildew.

No, shower curtains should not touch the floor. Leaving a gap of at least two inches between the curtain hem and the bathroom floor prevents excessive moisture and dirt buildup at the bottom, ensuring a cleaner and more hygienic bathroom environment.

It’s recommended to replace your shower curtain approximately every six months. While they can be washed, like other household items prone to wear and tear, it’s advisable to renew them at least twice a year for optimal hygiene and appearance.

While a single shower curtain, especially a vinyl one, needs to be placed inside the tub to prevent water from dripping onto the floor, a more aesthetically pleasing choice is to use two curtains. The inner liner, usually thin and white vinyl, hangs inside the tub, providing a functional and visually appealing solution.

Shower curtains made of polyester, PE (polyethylene), or PEVA (polyethylene vinyl acetate) are among the best choices. Polyester is machine-washable and moderately water-resistant. When utilized as a shower curtain liner, it is also treated to prevent mold growth.

Ensuring your shower liner is placed inside the tub and the curtain outside allows both materials to dry thoroughly after a shower. This separation prevents trapped moisture, a breeding ground for mold. Mold can begin growing in as little as 24-48 hours on a damp surface.

Follow these Alpha Textile tips to keep your bathroom mold-free:

1. Keep the bathroom fan on and running continuously.
2. Hang towels to dry thoroughly after each use.
3. Use a daily shower spray if the bathroom doesn’t dry completely between uses.
4. Place shower items on a rack or dish to avoid water accumulation.
5. Regularly inspect and replace cracked bathroom grout to prevent moisture seepage.

Here’s a natural way to remove mildew from your shower curtain: Create a solution by mixing equal parts white vinegar and water. Put the mixture in a spray bottle and generously spray the affected areas. Allow it to sit for 15-20 minutes to let the natural anti-fungal properties of vinegar work their magic.

The frequency of purchasing new bath towels depends on their quality, usage, and care. On average, it’s recommended to replace bath towels every 1 to 3 years. If your towels start to lose their softness, absorbency, or develop unpleasant odors despite regular washing, it might be time for an upgrade. High-quality towels can last longer with proper care, including gentle washing, avoiding fabric softeners, and not overloading the washing machine. Assess your towels’ condition regularly to ensure you’re maintaining a fresh and comfortable bathing experience.

It’s recommended to wash bath towels after every three to four uses. Towels tend to absorb moisture, which can lead to bacterial growth if not properly dried and laundered. Washing towels every few uses helps maintain their cleanliness, freshness, and absorbency. However, if a towel becomes visibly soiled or starts to smell, it should be washed immediately to prevent the growth of bacteria and odors. Additionally, using a towel hook or bar to hang towels after use allows them to air dry properly, extending the time between washes.

Yes, it’s advisable to wash new towels before using them. New towels, like any other textiles, might contain dust, dirt, or chemicals from the manufacturing and packaging process. Washing them before use ensures that you remove any impurities and makes the towels clean, fresh, and safe for your skin. It also helps to improve the towels’ absorbency, softness, and overall comfort.

There are several reasons why new towels might feel hard after washing:

1. Residues

Towels often have residues from the manufacturing process. Washing them before use can help remove these residues.

2. Detergent Buildup

Using too much detergent or fabric softener can lead to buildup on the towels, making them stiff. Use the recommended amount of detergent and avoid fabric softeners.

3. Hard Water

If you have hard water, the minerals in the water can make towels feel rough. Consider using a water softener or adding vinegar to the rinse cycle.

4. Over-Drying

Over-drying towels in the dryer can make them stiff. Remove them while they are still slightly damp to retain their softness.

5. Low-Quality Towels

The quality of the towels matters. Cheaper towels made from lower-quality fibers might feel rougher, especially after washing.

To keep new towels soft and fluffy, follow these tips:

1. Wash Before Use

Wash new towels before using them. This helps remove any coatings or residues left from the manufacturing process.

2. Use Vinegar

Add half a cup of white vinegar to the rinse cycle during the first wash. The vinegar helps to break down the detergent and soften the towels.

3. Avoid Fabric Softeners

Fabric softeners can leave a residue on towels, making them less absorbent. Instead of fabric softeners, use vinegar as mentioned above.

4. Limit Detergent

Use half the recommended amount of detergent. Excess detergent can remain in the fibers, making the towels stiff.

5. Dryer Balls

Use dryer balls or clean tennis balls in the dryer. They help fluff up the towels as they tumble, creating air pockets that keep them soft.

6. Dry Properly

Avoid over-drying your towels. Remove them from the dryer while they are slightly damp. Over-drying can make them feel rough.

7. Avoid Overcrowding

Don’t overcrowd the dryer. Giving towels enough space to tumble freely helps them fluff up.

8. Skip the Heat

If possible, line drying is great for towels. If you’re using a dryer, use a low heat setting.

9. Regular Cleaning

Wash your towels regularly, following the care instructions. Clean towels are more likely to stay soft and absorbent.

Remember that the quality of the towels also matters. Investing in high-quality towels made from natural fibers like cotton or bamboo can contribute to their softness and durability.

1. Cotton

Cotton is a versatile and widely used fabric for curtains. It is available in various weights and weaves, making it suitable for different styles. Cotton curtains are easy to clean, durable, and provide a natural, soft look to the room.

2. Linen

Linen curtains offer a timeless and elegant look. They have a natural texture and a slightly rough finish, adding depth to the decor. Linen is highly breathable, making it ideal for creating a light and airy atmosphere. However, linen curtains tend to wrinkle easily and may require regular ironing.

3. Silk

Silk curtains exude luxury and sophistication. They have a smooth, shiny surface that reflects light beautifully. Silk curtains drape gracefully and add a touch of glamour to any room. However, silk is delicate and requires gentle care. It is also more expensive than other fabrics.

4. Polyester

Polyester curtains are affordable, durable, and resistant to wrinkles and stains. They are available in a wide range of colors and patterns, making them a popular choice for budget-friendly options. Polyester curtains are easy to maintain and can mimic the look of natural fabrics.

5. Velvet

Velvet curtains create a rich and luxurious ambiance. They have a plush texture and offer excellent insulation, making them suitable for colder climates. Velvet curtains provide a sense of warmth and coziness to the room. However, they can be heavy and may block out more light than other fabrics.

6. Sheer Fabrics (Voile, Organza)

Sheer curtains, made from fabrics like voile or organza, allow natural light to filter through while providing some privacy. They create an ethereal and soft look, making them ideal for spaces where you want to maintain brightness. Sheer curtains are lightweight and can be layered with heavier curtains for a stylish effect.

The popularity of curtains often depends on individual preferences, interior styles, and functionality. However, some types of curtains are widely popular due to their versatility and timeless appeal:

1. Grommet Curtains

Grommet curtains have metal-ringed openings at the top, allowing the curtain rod to slide through easily. They offer a modern and streamlined look, making them popular for contemporary home decor.

2. Tab-Top Curtains

Tab-top curtains have fabric loops at the top, through which the curtain rod is threaded. They provide a casual and relaxed appearance, often suitable for bohemian or rustic interior designs.

3. Rod Pocket Curtains

Rod pocket curtains have a sewn-in pocket at the top that fits over the curtain rod. They create a gathered, traditional look and are suitable for various decor styles.

4. Pinch-Pleated Curtains

Pinch-pleated curtains feature evenly spaced pleats at the top, creating a tailored and elegant appearance. They are a classic choice for formal and traditional interiors.

5. Sheer Curtains

Sheer curtains are lightweight and translucent, allowing diffused light to enter the room. They add an airy and ethereal feel, making them popular for contemporary and minimalist designs.

6. Blackout Curtains

Blackout curtains are made from thick, light-blocking fabrics, providing privacy and blocking out sunlight. They are especially popular in bedrooms and home theaters for their functionality.

7. Cafe Curtains

Cafe curtains cover only the lower half of the window, offering privacy while allowing natural light to enter. They are commonly used in kitchens and bathrooms.

8. Panel Pair Curtains

Panel pair curtains come in pairs and cover the entire window when closed. They offer a cohesive look and are versatile for various room styles.

A throw pillow, or toss pillow, is a small, decorative soft furnishing item made from a wide range of textiles including cotton, linen, silk, leather, microfibre, suede, chenille, and velvet. Throw pillows are a commonly used piece in interior design and come in a wide variety of shapes, sizes and decorative elements such as tassels and piped edges.

Decorative pillows, also known as throw pillows or accent pillows, serve multiple purposes in home decor. Firstly, they add a touch of style and personality to a room, complementing the overall aesthetic. They often come in a variety of colors, patterns, and textures, allowing homeowners to experiment with different design elements.

Secondly, decorative pillows enhance the comfort of furniture. Placed strategically, they provide additional support, making sofas, chairs, or beds more inviting. They can also be used to create a cozy and visually appealing seating arrangement.

Furthermore, these pillows can be functional in providing lumbar or neck support, especially in the case of specially designed ergonomic decorative pillows. Some decorative pillows are also versatile and can be used outdoors, adding charm to patio furniture.

Ultimately, decorative pillows are a versatile and creative way to enhance the visual appeal, comfort, and functionality of a living space, reflecting the homeowner’s unique style and taste.

Decorative pillows are primarily designed for aesthetics and as accents in home decor. While they can add a stylish touch to your furniture, they are not intended for sleeping or laying on. These pillows are often filled with materials that are not as supportive as regular sleeping pillows, making them less comfortable for extended periods of use. Additionally, decorative pillows are usually smaller and may have embellishments like beads or sequins that can be uncomfortable when laid upon.

It’s best to use decorative pillows as intended – for decoration and to enhance the overall look of your furniture and living space. If you need support for sleeping or lounging, it’s advisable to use purpose-made, comfortable pillows specifically designed for those purposes.

The frequency of washing decorative pillows depends on how often they are used and their exposure to dirt or stains. As a general guideline, it’s recommended to wash decorative pillows every 3 to 6 months. However, if they are frequently used or if there are spills or stains, it’s advisable to clean them more often.

To maintain the quality and appearance of decorative pillows, always check the care instructions provided by the manufacturer. Some pillows have removable covers that can be washed separately, while others may need spot cleaning to preserve their decorative elements. Regular maintenance not only keeps your decorative pillows looking fresh but also ensures a clean and hygienic living environment.

The most common decorative pillow size is typically 18×18 inches. This size is popular because it fits well on most sofas, chairs, and beds, providing a balanced and aesthetically pleasing look. However, decorative pillows come in various sizes, ranging from 16×16 inches to 24×24 inches and even larger, allowing people to mix and match sizes for a customized and stylish arrangement. When choosing decorative pillows, it’s essential to consider the size of your furniture and the overall look you want to achieve in your home decor.

The lifespan of decorative pillows varies based on their quality, usage, and care. Generally, well-made decorative pillows can last anywhere from 5 to 10 years or even longer with proper maintenance.

Regular rotation and occasional fluffing can extend the life of decorative pillows. Additionally, following the manufacturer’s care instructions, such as spot cleaning or dry cleaning when necessary, can preserve the fabric and filling.

Ultimately, the longevity of decorative pillows depends on factors like the quality of materials, the amount of wear and tear, and how well they are cared for. Investing in high-quality decorative pillows and giving them proper care can significantly prolong their lifespan, ensuring they remain stylish and comfortable for years.

The duration for which kids use hooded towels varies widely. Typically, parents introduce hooded towels to infants and toddlers because they are soft, cozy, and provide extra warmth after baths. As children grow, around the age of 3 to 6, they may start transitioning to regular-sized towels. However, some kids continue to use hooded towels beyond this age, especially if they find them comforting or enjoy the fun designs. Ultimately, the choice depends on the child’s preference and the family’s habits. Always consider the child’s comfort and switch to regular towels when they are ready.

Baby Towels:

1. Size

Baby towels are smaller in size to accommodate the smaller body of an infant or toddler. They are typically square or rectangular and easier to handle for parents.

2. Hood

Many baby towels come with hoods attached to one corner. The hood helps to keep the baby’s head warm after a bath and is also useful for drying their hair.

3. Material

Baby towels are often made from soft, gentle, and hypoallergenic materials like cotton or bamboo. These materials are delicate on a baby’s sensitive skin.

4. Design

Baby towels frequently feature cute designs, often with animal hoods, to make bath time more enjoyable for infants and toddlers.

5. Thickness

Baby towels are generally thinner to ensure they dry quickly and are easy to handle.

Adult Towels

1. Size

Adult towels are significantly larger than baby towels to cover the entire body. They come in various sizes, such as bath towels, hand towels, and washcloths.

2. Absorbency

Adult towels are designed to be highly absorbent, capable of drying an adult’s body efficiently. They are thicker and more substantial than baby towels.

3. Material

Adult towels are made from a wide range of materials, including cotton, Egyptian cotton, microfiber, and blends. These materials offer different levels of softness, durability, and absorbency.

4. Versatility

Adult towels serve various purposes, from drying the body after a shower to being used at the beach or pool. They are versatile and come in different thicknesses to cater to specific needs.

In summary, the primary differences between baby towels and adult towels lie in their size, hood presence, material, thickness, and versatility, catering to the specific requirements of babies and adults.

While you technically can use adult towels on babies, it’s not the most practical or comfortable option. Adult towels are much larger than baby towels, making them challenging to handle and wrap around a small baby. Additionally, adult towels lack the specialized features that baby towels offer.

Baby towels are designed with the specific needs of infants and toddlers in mind. They are smaller, softer, and often come with hoods to keep the baby warm and cozy after a bath. The smaller size of baby towels makes them easier to manage and ensures that the baby is comfortably wrapped.

Using baby towels for infants and toddlers is generally recommended because they are tailored to the baby’s size and are made from gentle, hypoallergenic materials that are soft on the baby’s sensitive skin. They also often come in adorable designs, adding a touch of fun to bath time.

While using adult towels in emergencies is possible, for the baby’s comfort and safety, it’s advisable to stick with towels specifically designed for infants and toddlers.

Yes, they are indeed beneficial and convenient for several reasons. Firstly, hooded towels keep a child warm and cozy after a bath by providing extra coverage for wet hair, retaining body heat, especially useful for young children who get chilly quickly. Secondly, these towels make bath time more enjoyable due to their fun, colorful designs resembling animals or characters, sparking a child’s imagination during the drying process. Additionally, they simplify the drying process for parents, eliminating the need for an extra towel or hairdryer and saving time, especially with active kids.